Table of Contents
Advertisement
Dialing
There are three main ways to dial a
number:
❖ ❖ ❖ ❖ Number keys:
Enter numbers directly using the
key pad on the right side of the op-
eration panel.
❖ ❖ ❖ ❖ Quick Dials:
When you have stored a destina-
tion's number in a Quick Dial key,
you can dial the number by just
pressing that key. Additionally,
you can store a name that will ap-
pear on the display whenever you
press that Quick Dial.
❖ ❖ ❖ ❖ Speed Dials:
If you store a number in a Speed
Dial, when you want to dial it just
press the {Speed Dial} key followed
by a 2 or 3 digit code. Like Quick
Dials, you can store a name along
with the number.
This section covers these features and
others in more detail.
Number Keys
Enter numbers directly using the key
pad on the right side of the operation
panel.
Note
❒ Maximum length of a fax number:
254 digits.
❒ You can insert pauses and tones in
a fax number. ⇒ P.34 "Pause", P.35
"Tone"
❒ If the optional ISDN Unit is in-
stalled, you may need to enter a
subaddress.
A
Set your original and select any
scan settings you require.
Reference
P.12 "Setting Originals"
P.29 "Scan Settings"
B
Enter the fax number with the
number keys.
LTWO281E.eps
Dial
k Dial
The digits appear on the display as
you enter them.
Us45-1.tif
Note
❒ If you make a mistake, press the
{Clear/Stop} key to erase the
wrong digits and try again.
❒ If you wish to send this message
to more than one destination,
press [Add], then enter the next
destination.
❒ If the optional ISDN Unit is in-
stalled, select G3 or G4 before
you go to the next step.
C
Press the { { { { Start} } } } key.
Dialing
2
33
Advertisement
Table of Contents
