Table of Contents
Advertisement
Faxing
Reference
⇒ P.33 "Dialing"
See Chapter1, "Chain Dial" in
the Advanced Features manual.
E
Press the { { { { Start} } } } key.
LTWO261E.eps
2
Dial
k Dial
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
RTI or CSI in the machine of the
other party is shown on the dis-
play. When connected, the ma-
chine starts scanning the original.
Us15-6.tif
Reference
P.41 "RTI/TTI"
After transmission the machine
will return to standby mode.
Us28-1.tif
26
Sending Originals from the
Exposure Glass
A Set the first page face down on
the exposure glass.
B Dial.
C Press the { { { { Start} } } } key.
The machine starts scanning the
original.
D Set the next original on the ex-
posure glass within 10 seconds
after the machine has finished
scanning the first original.
Note
❒ Repeat steps C to D for all
originals.
E Set the last original then press
# ].
#
#
[#
F Press the { { { { Start} } } } key.
The machine starts to call the
destination.
- If the Connection Could Not Be
-
-
-
Made
The following display appears if the
fax could not be sent:
Us36-1.tif
Do one of the following:
• Press [Cancel] and try again.
• Press [Memory TX] to have the ma-
chine scan in the document and
then automatically redial the
number.
Advertisement
Table of Contents
