Speed Dial; Registering Speed Dial - Savin 4000 Operating Instructions Manual

Registering

Speed Dial

Registering Speed Dial

If you register a destination in a
Speed Dial, you can dial that number
by just pressing the {Speed Dial} key
followed by a two or three digit code.
Use these steps to program a new
3
Speed Dial or overwrite an existing
one. You can register the following
items in a Speed Dial:
• Destination fax number (up to 100
numbers, up to 254 digits for each
number)
• Destination name (up to 20 charac-
ters)
• A Telephone Directory search let-
ter (A to Z)
• Label Insertion (whether to print
the destination name on faxes sent
to this number)
• TTI (which TTI is printed on faxes
sent to this number)
Important
❒ We recommend that you print the
Speed Dial list and keep it when
you register or change a destina-
tion.
Limitation
❒ When a registered Speed Dial is
being used for a standby Memory
Transmission, the message "
destination is in use for
standby transmission file.
Please modify/delete after
transmission.
you cannot change the destination
for this Quick Dial. See Chapter5,
"Reports/Lists" in the Advanced
Features manual.
52
This
" is shown and
Note
❒ You can specify codes 00 to 99.
❒ If you install the optional Expan-
sion Memory, you can register up
to 1,000 numbers in Speed Dials. In
this case codes 000 to 999 are used.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Us28-1.tif
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the { { { { User Tools} } } } key.
LTWO120E.eps
Screen Contrast
User Tools Adjustment Program
C
Enter the function number for
" R e g i s t e r / D e l e t e " w i t h t h e
number keys.
Us137-2.tif
Interrupt
Clear Modes Energy Saver