Table of Contents
Advertisement
B
Set the original.
Limitation
❒ You can send the first pages
from the exposure glass then
the remaining pages from the
Document Feeder (ARDF). Af-
ter you place the last page on
the exposure glass, you have 60
seconds to insert the remaining
pages in the Document Feeder
(ARDF).
❒ Note that you cannot set pages
on the exposure glass after you
have started using the Docu-
ment Feeder (ARDF).
❒ Do not open the Document
Feeder (ARDF) while it is scan-
ning in originals.
Note
❒ Place the original you want to
store in memory on the expo-
sure glass or the Document
Feeder (ARDF). To store multi-
ple page originals from the ex-
posure glass, set them page by
page.
❒ You can scan half the pages of
your original from the exposure
glass and the remainder from
the Document Feeder (ARDF).
When you have finished scan-
ning from the exposure glass,
place the rest of the pages in the
Document Feeder (ARDF) and
press the {Start} key.
❒ The original can be placed at
any time up until you press the
{Start} key.
Reference
P.12 "Setting Originals"
C
Select any scan settings you re-
quire. ⇒ ⇒ ⇒ ⇒ P.29 "Scan Settings"
D
Dial. If you wish to send the same
message to more than one desti-
nation, press [Add] and dial anoth-
er destination. Repeat this step
for all destinations.
Us28-1.tif
If you make a mistake, press the
{Clear/Stop} key and enter the cor-
rect number again.
Note
❒ When specifying a destination
using a Quick Dial, Speed Dial
or Group dial, the destination is
added even if you did not press
[Add].
❒ When dialing with the number
keys or using Chain Dial, you
can select the line type (G3 or G4)
before pressing [Add] in step D.
❒ If you do not set an original
within 30 seconds of entering a
destination fax number, the
transmission is canceled.
Reference
P.33 "Dialing"
Memory Transmission
19
2
Advertisement
Table of Contents
