Table of Contents
Advertisement
- How to set A4, B4, A3, Lt, LG
-
-
-
and DLT size originals
ND0X01E2.eps
Original
Exposure glass
- How to set A4, A5 and B5 size
-
-
-
originals
ND0X01E1.eps
Original
Exposure glass
Limitation
❒ 5
1
1
/
"×8
/
" /A5 size on the expo-
2
2
sure glass is not detected. Set 5
×8
1
/
" /A5 size documents in the
2
ARDF.
Where original is set
Document Feeder(ADF)
ND0X01E2
Where original is set
Document Feeder(ADF)
ND0X01E1
1
/
"
2
Setting a Single Original on
the Exposure Glass
Set originals that cannot be placed in
the Document Feeder (ARDF), such
as a book, on the exposure glass one
page at a time.
A
Lift the Document Feeder (ARDF)
by at least 30 degrees. Place the
original face down and align its
upper left corner with the refer-
ence mark at the upper left corner
of the exposure glass.
Zaah220e.eps
1. Reference mark
2. Scale
Note
❒ If you do not raise the Docu-
ment Feeder (ARDF) by at least
30 degrees, the original size will
not be detected.
B
Close the Document Feeder (AR-
DF).
Note
❒ When sending a bound original,
the received image may contain
some black areas. To reduce this
effect, hold down the original to
prevent its bound part from ris-
ing.
Setting Originals
2
13
Advertisement
Table of Contents
