Original Type; Image Density (Contrast) - Savin 4000 Operating Instructions Manual

Faxing
A
Press the { { { { Resolution} } } } key to
switch between resolutions. The
indicators above the key shows
the current selection.
LTWO190E.eps
Commu- Receive
nicating File
Start TX File
Manual RX Status
2

Original Type

If your original contains photo-
graphs, illustrations or diagrams with
complex shading patterns or grays,
select the appropriate Original Type
to optimize image clarity.
❖ ❖ ❖ ❖ Text
Select Text to send an original con-
taining a high-contrast black-and-
white image. Use this setting even
if your original contains text and
photographs or if you only want to
send clearer text.
❖ ❖ ❖ ❖ Text·Photo
Select Text·Photo to send an origi-
nal containing both a high-contrast
black-and-white image, such as
text, and a halftone image such as a
photograph.
❖ ❖ ❖ ❖ Photo
Select Photo to send an original
containing a halftone image such
as a photograph or a color original.
Limitation
❒ If you select Text·Photo or Photo,
resolution is automatically set to
Detail. Even if you select Text
again, the resolution will not re-
turn to Text.
30
Standard
Confidential
Immediate
File
Detail
Trans.
TEL Memory
Super Fine
Mode Trans.
Note
❒ If you select Text·Photo or Photo,
the transmission will take longer
than when Text is selected.
❒ If you send a fax message with
Text·Photo or Photo and the back-
ground of the received image is
dirty, reduce the density setting
and re-send the fax.
❒ When the machine is turned on or
modes are cleared, the Original
Type is set to Text. You can change
this with the Initial Setup TX set-
tings.
❒ By default, the machine returns to
the Original Type home setting af-
ter every transmission. You can
change this with the User Parame-
ters.
A
Press the [Original Type] key for the
type you require.
LTWO053N.eps

Image Density (Contrast)

The text and diagrams in your origi-
nal should stand out clearly from the
paper they are written on. If your
original has a darker background
than normal (for example, a newspa-
per clipping), or if the writing is faint,
adjust the image density.
By default, this machine will auto-
matically select a density setting ap-
propriate to the original (Auto Image
Density). If you wish to set the densi-
ty yourself, use Manual Image Densi-
ty.