Table of Contents
Advertisement
Faxing
Memory Transmission
In Memory Transmission mode, after
you press the {Start} key, the machine
does not dial the destination until all
pages of your fax message have
scanned into memory (in contrast
2
with Immediate Transmission, where
the number is dialed first and pages
are scanned and sent one by one).
Memory Transmission is useful be-
cause:
• You can take your original away
from the machine without having
to wait too long
• While your message is being sent,
other people can operate the ma-
chine
• You can send the same message to
more than one place in a single op-
eration (Broadcasting)
Important
❒ If there is a power failure (Main
Power switch is off) or the plug is
pulled out for more than 1 hour, all
the files stored in memory are de-
leted. As soon as power is restored,
the Power Failure Report is print-
ed to help you identify deleted
files. If you turn just the operation
switch off, files are not deleted.
Limitation
❒ If memory is full (0% appears on
the display), Memory Transmis-
sion is disabled. Use Immediate
Transmission instead.
Note
❒ Maximum number of Memory
Transmission files: 200 (up to 1,000
files with optional Expansion
Memory installed)
18
❒ Maximum number of destinations
per Memory Transmission: 200
❒ Combined total number of desti-
nations that can be stored:500
❒ The theoretical maximum number
of destinations you can enter with
the number keys is 99, but this will
depend on the amount of memory
currently available.
❒ The number of pages that you can
store in memory depends on the
original images and the scan set-
tings. You can store up to 160
standard pages (ITU-T #1 chart,
Resolution: Standard, Original
Type: Text).
❒ The machine will return to the de-
fault transmission mode (Memory
Transmission) after every trans-
mission. You can change this so
that the desired setting is main-
tained.
❒ The maximum total number of
documents that can be stored in
memory is as follows:
• About 480 pages with only the
optional Expansion Memory in-
stalled
• About 3,000 pages with both the
optional Expansion Memory
and Expansion Memory in-
stalled
A
Make sure that the Memory
Transmission indicator is lit.
LTWO140E.eps
Commu-
Receive
Confidential
nicating
File
File
Start
TEL
TX File
Manual RX
Status
Mode
If it is not, press the {Transmission
Mode} key.
Standard
Immediate
Detail
Trans.
Memory
Super Fine
Trans.
Advertisement
Table of Contents
