Savin 4000 Operating Instructions Manual page 62

D
Enter the number for "Reg.
Group Dial" with the number
keys.
Us137-3.tif
Note
❒ If "Reg. Group Dial" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E
Press the Quick Dial key in which
you want to register the Group.
Usfax-new002.tif
Note
❒ If you make a mistake, press
[Cancel] then try again.
❒ You can press [Status] to see the
status currently programmed.
Usfax-new042.tif
F
Enter a fax number then press
[Add].
Us142-4.tif
Note
❒ Enter a destination in any of the
following three ways:
• Enter the fax number with
the number keys.
• Press a Quick Dial key in
which the destination is reg-
istered.
• Press the {Speed Dial} key
and enter a Speed Dial code.
❒ If you make a mistake, press the
{Clear/Stop} key and re-enter the
correct Group number.
❒ If destinations are already regis-
tered, they are shown on the
display. Press the < or > key
to scroll through the destina-
tions on the display. If you want
to change a destination, select it
and press the {Clear/Stop} key.
Press the {Clear/Stop} key once
to erase a Quick Dial or Speed
Dial number, or press it repeat-
edly to erase a number entered
with the number keys.
❒ You
cannot
number.
G
Repeat step F F F F for all the destina-
tions you want registered in the
Group.
H
Press [Name].
I
Enter the Group name.
Us139-2.tif
Note
❒ If the Group name is already
registered, it is shown on the
display. If you wish to change
the Group name, p ress the
{Clear/Stop} key and enter an-
other name.
Reference
P.65 "Entering Text"
Groups
omit the fax
57
3