Table of Contents
Advertisement
Faxing
- Batch Transmission
-
-
-
If you send a fax message by Memory
Transmission and there is another fax
message waiting in memory to be
sent to the same destination, that
message is sent along with your orig-
2
inal. Several fax messages can be sent
with a single call, thus eliminating the
need for several separate calls. This
helps save communication costs and
reduce transmission time.
Fax messages for which the transmis-
sion time has been set in advance are
sent by batch transmission when that
time is reached.
Note
❒ By default Batch Transmission is
switched on. You can switch it on
or off with the User Parameters.
- ECM (Error Correction Mode)
-
-
-
This feature automatically sends data
that was not transmitted successfully
using a system that complies with in-
ternational standards.
ECM requires that the destination
machine has the same feature.
Note
❒ By default ECM is switched on.
You can change this with the Key
Operator Settings. See Chapter6,
"ECM" in the Advanced Features
manual.
22
Advertisement
Table of Contents
