Table of Contents
Advertisement
Starting the Machine
To start the machine, turn on the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See "Energy Saver
Timer", "Auto Off Timer" in the
Copy Reference.
- Power switches
-
-
-
This machine has two power switch-
es: See P.1 "Guide to Components".
❖ ❖ ❖ ❖ Operation switch
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies
or send faxes.
❖ ❖ ❖ ❖ Main power switch
Do not touch the Main Power
switch. It should be used only by a
service representative when the
optional fax unit is installed.
Important
❒ If you leave the Main Power
switch off for more than one hour,
all fax files in memory are deleted.
See "Turning Off The Power" be-
low.
Turning on the Power
A
Confirm that the power cord is
plugged into the wall outlet firm-
ly and the Main Power switch is
on.
B
Turn on the operation switch. The
On indicator should light.
The panel display will turn on.
LTWO020E.eps
Interrupt
Clear Modes
Energy Saver
Note
❒ If nothing happens when you
turn on the operation switch,
make sure the Main Power
switch is turned on.
Turning off the Power
A
Turn off the operation switch.
The On indicator will go out.
LTWO020E.eps
Interrupt
Clear Modes
Energy Saver
Important
❒ Before you unplug the power
cord, confirm that the display in
Facsimile mode indicates that the
remaining memory space is 100%.
❒ Fax files stored in memory will
be deleted an hour after you
turn the Main Power switch off
or you unplug the power cord.
Starting the Machine
7
1
Advertisement
Table of Contents
