Switching Between Copy Mode And Facsimile Mode - Savin 4000 Operating Instructions Manual

Getting Started
Switching Between Copy Mode and
Facsimile Mode
1
This machine is both a fax and a copier. When you turn on the power switch, the
copier screen is shown and the machine is ready to make copies. When you wish
to use fax functions, press the {Facsimile} key on the right of the operation panel.
You can set this machine to display facsimile mode immediately after the power
switch is turned on. See "Changing the Machine Settings" in the Copy Refer-
ence.
LTWO122E.eps
Dial
k Dial
Limitation
❒ You cannot switch modes under the following circumstances:
• While scanning in a fax
• During Immediate Transmission
• While editing the System Settings
• During Interrupt Copying
• While using On-hook Dial
8