The Site Survey Screen; Figure 17 Station Mode: Site Survey; Table 4 Station Mode: Site Survey - ZyXEL Communications G210H User Manual

Table 3 Station Mode: Link Info (continued)
LABEL
Link Quality
Noise Level

4.3 The Site Survey Screen

Use the Site Survey screen to scan for and connect to a wireless network automatically.

Figure 17 Station Mode: Site Survey

The following table describes the labels in this screen.

Table 4 Station Mode: Site Survey

LABEL
Available Network
List
,
,
or
.
SSID
Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
The status bar shows the quality of wireless connection. This refers to the
percentage of packets transmitted successfully. If there are too many wireless
stations in a wireless network, collisions may occur which could result in a loss of
messages even though you have high signal strength.
This field displays the noise level that the G-210H is detecting while linked with the
connected AP.
DESCRIPTION
Click a column heading to sort the entries.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless
security is deactivated.
This field displays the SSID (Service Set IDentifier) of each wireless device.
ZyXEL G-210H User's Guide
35