Wpa/Wpa2; Figure 32 Station Mode: Security Settings: Wpa/Wpa2; Table 7 Station Mode: Security Setting: Wpa-Psk/Wpa2-Psk; Table 8 Station Mode: Security Setting: Wpa/Wpa2 - ZyXEL Communications ZyXEL AG-220 User Manual

The following table describes the labels in this screen.

Table 7 Station Mode: Security Setting: WPA-PSK/WPA2-PSK

LABEL
Encryption Type
Pre-Shared Key
Back
Next
Exit

4.3.1.3 WPA/WPA2

Note: At the time of writing Login Name and Password are not available on
Windows Vista.

Figure 32 Station Mode: Security Settings: WPA/WPA2

The following table describes the labels in this screen.

Table 8 Station Mode: Security Setting: WPA/WPA2

LABEL
Encryption Type
Authentication
Type
Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to Section 3.2.3.3 on page 40
Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal
characters.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
DESCRIPTION
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to Section 3.2.3.3 on page 40
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
ZyXEL AG-220 User's Guide
for more information.
60.
for more information.
57