Led Test - Toshiba ESTUDIO170F Operation Manual

LED TEST

The LED test checks LED op-
eration by lighting all the LEDs
on the Operation Panel.
1
Select the LED TEST
Menu
Press:
MENU
+
+
+
+
All the LEDs blink or light with
the following message dis-
played.
LED TEST
[STOP] TO COMPLETED
If there was no input for 1
minute, Returns to display the
SETUP menu screen.
2
Check the LCDs
Visually check that all the
LEDs are on. After checking,
STOP
press .
LED TEST
1.OK
2.NG
3
Select the Test Result
Option
If all the LEDs turn on, press:
If even one LED is not lit,
press:
4
Completed the
LED TEST
The word "OPERATION COM-
PLETED" is displayed on the
screen and the unit returns to
the individual test selection
screen.
The result of the LED test can
be confirmed with the self test
report. To print the self test re-
port, refer to "PRINTING A
TEST" on page 230.
If the result of the LED test is
judged to be NG, call your ser-
vice representative.
223