LED TEST
The LED test checks LED op-
1
eration by lighting all the LEDs
on the Operation Panel.
Press:
All the LEDs blink or light with
the
played.
2
Select the LED TEST
Check the LCDs
Menu
Visually check that all the LEDs
are on. After checking, press
+
LED TEST
+
1.OK
2.NG
+
+
following
message
dis-
LED TEST
[STOP] TO COMPLETED
3
Select the Test Result
Option
If all the LEDs turn on, press:
.
If even one LED is not lit, press:
4
Completed the
LED TEST
The word "OPERATION COM-
PLETED" is displayed on the
screen and the unit returns to
the
individual
test
selection
screen.
The result of the LED test can
be confirmed with the self test
report. To print the self test re-
port, refer to "PRINTING A
TEST" on page 239.
If the result of the LED test is
judged to be NG, call your ser-
vice representative.
233