Toshiba ESTUDIO170F Operation Manual page 167

Dialing with Sub-Address - continued
5
Enter the SEP
Address
Enter the required SEP ad-
dress (max. 20 digits), then
press:
The display returns to the
screen at the bottom of Step 2.
You may continue from Step 3
and enter another sub-address
of a different type. To complete
your sub-address entry, select
option "1.DONE" in step 3.
6
Enter the PWD
Enter the required PWD (max.
20 digits), then press:
The display returns to the
screen at the bottom of Step 2.
You may continue from Step 3
and enter another sub-address
of a different type. To complete
your sub-address entry, select
option "1.DONE" in Step 3.
7
Complete the
Sub-Address Entry
When the sub-address data
has been entered, the following
is displayed.
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
8
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option
at this point.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92
NOTE:
When all the Sub-Ad-
dresses are set:
If the document is loaded in
the Document Support,
transmission starts with a
combination of SUB and
PWD.
If the document is not
loaded in the Document
Support, transmission starts
with a combination of SEP
and PWD.
165