Default Setting For Document Mode (Resolution And Contrast) - Toshiba ESTUDIO170F Operation Manual

Default Setting for Document Mode (Resolution and Contrast)

This setting will select the de-
fault setting whenever a docu-
ment is set in the facsimile for
transmission. Manual settings
(if selected for a particular doc-
ument) will take precedence
over default settings.
Display the
1
DOCUMENT MODE
Menu
Press:
MENU
+
+
+
+
DOCUMENT MODE
1.STANDARD
2.FINE
3.U-FINE
2
Select the
Resolution
Select the desired resolution
setting by pressing one of the
following keys.
Select STANDARD mode for
sending normal text and graph-
ics by pressing:
Select FINE mode for sending
normal text and graphics with
extra clarity by pressing:
Select U-FINE (Ultra-Fine) for
sending fine text and graphics
with extra clarity by pressing:
CONTRAST
1.NORMAL
2.DARKER
3.LIGHTER
3
Select the Contrast
Select the default contrast
level by pressing one of the
following keys.
Select NORMAL for normal
documents by pressing:
Select DARKER to darken light
originals (i.e., for documents
with light or faint print) by
pressing:
Select LIGHTER to lighten
dark originals (i.e., for docu-
ments with dark print) by
pressing:
COMPLETED
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
4
Select Another
SETUP Item, or ...
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
STOP
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
85