Test Command - Toshiba GD-1190 Service Manual

Large item Middle item
Send functions Application send
function
Incoming Incoming detection
functions function
system
Application incoming
function
Receive Receive function
functions
system
Basic receive function
Basic receive function
Small item
Manual send function
Time specifying send Available
function communication
Number of set items
Set range
Day of week
Group send function
Serial broadcast Broadcast send
function destination
Duplex send function
Send document size
Call signal detection
function
Remote select
function by CNG
detection
Distinctive Ring
function
Call bell pattern
Incoming reject
function
Call sound volume Volume select
adjustment function
Alarm sound volume Volume select
adjustment function
Key sound volume
setting
Junk FAX protection
function
Number of
registrations
Receive standby
mode
Auto receive function
Number of calls
Tel/FAX auto select
Incoming reject
conditions
Manual receive
function
Number of calls
Memory receive
function
Substitution receive
function
Forcible memory
receive function
Overtake output
function
GD-1190 SPECIFICATIONS 1 - 3
Sub item
This function allows to switch to FAX manually when
off-hook with document set.
Memory send, Polling, serial broadcast, serial send
request
Max. 5 items
00:00 - 23:59 (Unit: 1 min)
8 kinds (From Monday to Sunday, and no
specification)
A message is sent sequentially to two or more
destinations registered in group dial. (Max. 52
destinations can be registered in one group.)
Max. 100 items
Valid only in duplex support models.
Direct send and scan from OC cannot be made.
A4/ Letter/ Legal size
Call bell is distinguished from net call signals to judge
incoming.
Receive is started when CNG signal is detected in
standby with external telephone used.
Conforms to the call distinguishing function provided
by the local telephone company.
OFF/STANDARD/Pattern 1 - 5
Incoming is rejected when remaining memory
capacity is less than 7%.
OFF/LOW/MIDDLE/HIGH
OFF/LOW/MIDDLE/HIGH
Follows setting on the main unit.
Junk stations are registered to be rejected.
Max. 10 items
• Auto (AUTO)
• Manual (MAN.)
• Answering machine (A.M.)
The line is switched to FAX by detection of call signal.
(receive standby mode)
AUTO: 0 - 9 times (Default: 2 times)
No
• During Test Command by serviceman
• Insufficient memory capacity
• During menu
• During memory status display
Receive is manually started.
0 - 9 times (Default: 0 times)
Receive data are accumulated in memory, and
outputted when output conditions are satisfied.
Countermeasure against print inhibit state.
• No recording paper
• Recording paper jam
• During copy/print job
• During printing by printer
• Cover open
• Paper empty, size error
No
No
Specifications