Line Monitor
This function is used to set the
facsimile's speaker ON in order
to monitor the phone line for
one communication only. This
function is mainly used to con-
firm dialing and phone line sta-
tus.
You can activate this option
when programming an Abbrevi-
ated Dial Number (page 65) or
One Touch Dial Key (page 71)
if communication with a certain
remote party always requires
this option.
NOTE:
To change the default set-
ting of this function, refer to
page 57. The status selec-
tion in this operation will
take precedence over the
default setting.
1
Load the Document
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
JAN-31 09:43 AM 100%
AUTO RECEIVE
2
Display the LINE
MONITOR Menu
Press:
MENU
+
+
LINE MONITOR
2.OFF
1.ON
3
Select the Option
Turn ON the monitor speaker
by pressing:
Turn OFF the monitor speaker
by pressing:
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option
at this point.
•
One Touch Key Dialing
... See page 89
•
Abbreviated Dialing
... See page 90
•
Alphabet Dialing
... See page 91
•
Keypad Dialing
... See page 92
175