Disabling Ecm Temporarily - Toshiba ESTUDIO170F Operation Manual

Disabling ECM Temporarily

If the ECM default setting is
set to ON, it is always effec-
tive for communications on
your facsimile (see page 59).
You can turn the ECM OFF for
a single transmission using
this procedure. The facsimile
will automatically return to its
default status immediately af-
ter that transmission is com-
plete.
NOTES:
• If ECM is set to "OFF" in
the default setting proce-
dure, this procedure is not
applicable and the fac-
simile will warn you with
an error message, "NOT
ALLOWED NOW."
• You can change the set-
ting even when a docu-
ment is not set on the
Document Support. The
setting becomes invalid if
no keys are pressed for
about 60 seconds.
1
Display the SET
ECM Menu
Press:
MENU
+
+
+
+
ECM
1.ON
2.OFF
2
Select the ECM
Option
Select "2.OFF" by pressing:
The following screen is dis-
played. You may dial the re-
mote facsimile for your com-
munication job. The display will
return to the Standby Mode in
about 60 seconds if no keys
are pressed.
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
163