Channel Step Setting (Multi-Voltage Model Only); To Change Channel Steps (Multi-Voltage Model Only); Direct Access Tuning - Pioneer VSX-D1011-G Operating Instructions Manual

Channel Step Setting (multi-voltage model only)

The unit has been factory preset to the channel allocation value for the area in which it is to be sold. If this
value is set incorrectly, the tunes in frequency may be wrong, or sound may be distorted, resulting in an
inability to reproduce reception signals at their proper sound quality. For this reason, be sure to confirm
that the values are set correctly before first using the unit.
FM 50 kHz, AM 9 kHz:
Set to this position, for areas with an FM reception step of 50 kHz and AM 9 kHz.
FM 100 kHz, AM 10 kHz:
Set to this position for areas with an FM reception step of 100 kHz and AM 10 kHz.
When unsure about the channel allocation for your area, consult your dealer for correct
memo
information.
To Change Channel Steps
1 Turn the power off (standby mode).
2 While holding down the TONE – button press the STANDBY/ON button.
3 When you see STEP 9K/50K or STEP 10K/100K appear in the display. To change channel steps again
repeat steps 1 and 2.

Direct Access Tuning

The following steps show you how to tune directly to a specific frequency using the remote control.
RECEIVER
MULTI
OPERATION
MULTI CONTROL
DVD/LD TV / SAT
C D
VCR 2
ACOUSTIC
MOVIE MUSIC
SURROUND
MODE
STEREO/
ENTER
DIRECT
MASTER
VOLUME
MENU TUNER EDIT
TUNE
SYSTEM
SETUP
ST
ENTER
AUDIO
TUNE
−
CHANNEL TEXT OFF
RF ATT D.ACCESS
3
DIMMER LOUDNESS
SIGNAL SEL DNR BASS/TREBLE
4
VIDEO SEL HI-BIT
TV CONTROL
CHANNEL
RECEIVER
SOURCE
SYSTEM
OFF
1
VCR1/DVR TV CONT
TUNER RECEIVER
EQ INPUT
SB CH MULTI CH
MODE INPUT
MIDNIGHT
MUTE
TEXT ON TOP MENU
GUIDE
ST
RETURN
+
BAND CHANNEL
2
MPX CLASS
TONE EFFECT/CH SEL
ENTER
DISC
+ −
+
10
SUB TITLE
REMOTE
VOLUME
SETUP
1 Press the TUNER button.
This selects the tuner function on the receiver and sets
the remote to the tuner operation mode.
2 Press the BAND button to select the
band (FM or AM).
Each press switches the band : FM j AM
3 Press the D.ACCESS button to
activate the direct access tuning
mode.
The cursor blinks in the display on the front panel.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT TONE DNR
DIGITAL
AUTO
RF DTS ES EX
DIGITAL MPEG AAC
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S S R S SP A B
4 Use the number buttons to enter the
frequency of the station you want.
Example:
To tune station 106.00 (FM), press: 1 = ` = 6 =
` = `
To cancel before inputting the frequency
Press D.ACCESS, and enter the frequency again.
Using the Tuner
ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
55
En