Pioneer VSX-D1011-G Operating Instructions Manual page 38

Setting Up for Surround Sound
MENU
SYSTEM
SETUP
AUDIO
CHANNEL
RF ATT
1-6
STANDBY/ON
MOVIE MUSIC ENTER
MULTI JOG
1 SPEAKER SET should be selected.
If it isn't use the 5∞ buttons to
select it. Press the ENTER button.
SIGNAL PRO LOGIC Neo :6 LOUDNESS
AUTO DIGITAL
RF DTS ES EX
DIGITAL MPEG AAC
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R SP A B
S S
2 Use the 5∞ buttons to select
FREE or THX speaker system
setting. Press the ENTER button.
FREE: To set all the speakers.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
THX: All speakers are set to SMALL and the
SUBWF to YES. You can select the number of
surround back speakers.
PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
SIGNAL
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
For FREE, select it and press ENTER. Then go to
step 3.
For THX, select it and press ENTER. Then go to
step 4 but you only need to set the number of
surround back speakers.
38
En
MASTER
VOLUME
TUNER EDIT TEXT ON TOP MENU
TUNE
GUIDE
1-6
ST ST
ENTER
RETURN
TUNE
− +
TEXT OFF BAND CHANNEL
D.ACCESS MPX CLASS
STANDBY
MULTI JOG CONTROL STA
SIGNAL HI-BIT SB CH
SET UP RETURN SELECT HI-SAMPLING MODE BAND CLASS
SELECT
PHONES TONE CONTROL
SPEAKERS TONE BASS/TREBLE
STEREO MONO
MIDNIGHT TONE DNR ATT dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
TONE DNR ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
TONE DNR ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
3 With the 5∞ buttons choose the
speakers that you want to set.
Press the ENTER button.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R SP A B
S S
You can select from FRONT, CENTER, SUR-
ROUND or SURROUND BACK. The selected
setting blinks.
4 Use the 5∞ buttons to choose
the number (YES or NO, X1 or
X2) and the size (LARGE or
SMALL) for each set of speakers.
Press the ENTER button.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
PLUS is also a possibility for the SUBWF.
If you selected THX in step 2, you only need to
set the number of surround back speakers (X1,
X2, or NO).
5 Repeat steps 3 & 4 for all
speakers channels.
6 Use the 5∞ buttons to select
EXIT and press ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C LFE
R
L S R
S S SP A B
Next, proceed to CHANNEL LEVEL next page.
If you want to change a setting before
proceeding
start over from step 1.
memo
If you have a subwoofer and like lots of bass, it may
seem logical to select LARGE for your front speakers
and leave the subwoofer selected. This may not,
however, yield the best bass results. Depending on
the size and shape of your room you may actually
experience a decrease in the amount of bass due to
what is called low frequency cancellations. If you
have a subwoofer, listen to the bass response with
the front speakers set to LARGE and SMALL
alternately and let your ears judge which sounds best.
If you have a subwoofer, the safest option is to route
all the bass sounds to it by selecting SMALL for the
front speakers.
TONE DNR ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
TONE DNR ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
TONE DNR ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM