Pioneer VSX-D1011-G Operating Instructions Manual page 31

DNR (DIGITAL NR) button (see page 47)
Switches the DIGITAL NR on or off.
BASS/TREBLE button (see page 49)
Use to select whether the bass or treble will be
adjusted.
VIDEO SELECT button (see page 53)
Use to toggle between the different video input
possibilities.
HI-BIT button (see page 50)
Use this button to switch the HI-BIT
HI-SAMPLING on or off. Use to hear CD and
DVD, as well as other digital soundtracks at a
wider dynamic range, allowing for finer audio
reproduction.
(+/–) buttons (see page 49)
Use to adjust the TONE level, effect level and
channel level as well as make Dolby Pro Logic
II MUSIC parameter settings.
EFFECT/CH SEL button
Switches between the different channels so
you can add volume individually to each
channel with the + and – buttons. Also selects
EFFECT mode of Pioneer original sound modes
and Dolby Pro Logic II MUSIC parameter
settings. You can then use the + and – buttons
to make these adjustments.
8 TV CONTROL buttons
The following buttons are used to control the TV
only and can be used once they are preset to
control your TV.
:
This is a dedicated TV button. Use it to turn on/
off your TV.
INPUT SELECT: Press to select the input
source for the TV.
CHANNEL +/– : Use these buttons to change
the channel of the TV.
VOLUME +/– : Press to control the volume of
the TV.
9 MULTI OPERATION button
Use this button to start the MULTI OPERATION
mode. See pages 72–73 for how to program
and use the MULTI OPERATION mode.
0 LED DISPLAY
This display flashes when a command is sent
from the remote control to the receiver. It also
flashes at other times, for example when
teaching the receiver preset codes.
- SOURCE
button
Use this button to turn on/off other
components. You must input the preset code in
order to use this function (see page 65).
= RECEIVER button
Use this button to switch the remote control
into receiver mode in order to get certain
receiver functions or do receiver setups.
Displays & Controls
~ RECEIVER control buttons
ACOUSTIC EQ button (see page 47)
Use to switch on and off the Acoustic Calibra-
tion EQ.
SB CH MODE button (see pages 51)
Use this button to turn the surround back
channels ON/OFF/AUTO or switch the VIRTU-
AL SURROUND BACK mode between ON/
OFF/AUTO.
MIDNIGHT button (see page 48)
Switches the MIDNIGHT listening mode on or
off (for all modes except THX CINEMA and
MULTI CH IN).
INPUT button
Press to select an input source. The button will
cycle through all the possible sources.
MULTI CH INPUT button (see page 50)
Use this button to select the component you
have hooked up to the MULTI CH IN terminals
(for example, a DVD-Audio player).
MUTE button
Press to mute or restore the volume.
! MASTER VOLUME (–/+) buttons
Use to raise or lower the volume of the receiver.
@ TOP MENU/GUIDE button
Use to find stations or menus on a digital TV
tuner. For a DVD player use this button to bring
up the DVD menu.
# » ˜«˜| | | ˜\ | | \ \ \ \ ˜ENTER buttons
These buttons can be used for a variety of
operations in the SYSTEM SETUP menu.
These buttons are used to control the menus
for other components when in those modes
(DVD, digital TV tuner, satellite tuner, cable
tuner, etc.). In TUNER mode, they can select a
station and/or a frequency.
$ RETURN button
When you are in a receiver setup operation this
button will go back one step in the SYSTEM
SETUP procedure. When you are using your
DVD menu screen this button acts the same as
the DVD player's "RETURN" button. When you
are using cable tuners, satellite tuners or digital
TV tuners this button will either exit you from
the menu screen or act like a "RETURN" button
above, depending on the maker of the unit.
% SUBTITLE button
Use to switch the subtitles on a DVD player or
disc.
^ REMOTE SETUP button.
Use to customize the remote control functions
and the remote control itself. (See "Setting Up
the Remote Control to Control Other Compo-
nents" starting on page 63).
31
En