Adjusting The Effect Of A Listening Mode; Adding/Adjusting The Effect In Dolby Pro Logic Ii Music Mode - Pioneer VSX-D1011-G Operating Instructions Manual

Basic Operation

Adjusting the Effect of a Listening Mode

The DSP (Digital Signal Processing) listening modes have sound processing added to accentuate a certain kind
of atmosphere or effect (see the preceding pages for explanation). You can choose if you want to strengthen or
weaken this effect in the given mode. The DSP MOVIE modes are: ACTION, SCI-FI, DRAMA, MUSICAL,
MONOFILM, 5/7-D THEATER. The DSP MUSIC modes are: CLASSICAL, CHAMBER, JAZZ, ROCK, DANCE.
The following instructions show you how to adjust the amount of effect.
RECEIVER
MULTI
OPERATION
MULTI CONTROL
DVD/LD
TV / SAT
VCR 2 C D
MOVIE MUSIC
SURROUND
MODE
STEREO/
ENTER
DIRECT
MASTER
VOLUME
MENU TUNER EDIT
TUNE
SYSTEM
SETUP
ST
ENTER
AUDIO
TUNE
−
CHANNEL TEXT OFF
RF ATT D.ACCESS
DIMMER LOUDNESS
SIGNAL SEL DNR
VIDEO SEL HI-BIT
TV CONTROL
CHANNEL
RECEIVER
46
En
SOURCE
SYSTEM
OFF
VCR1/DVR TV CONT
1
TUNER RECEIVER
ACOUSTIC
EQ INPUT
SB CH MULTI CH
MODE INPUT
MIDNIGHT
MUTE
TEXT ON TOP MENU
GUIDE
ST
RETURN
+
BAND CHANNEL
MPX CLASS
2
TONE EFFECT/CH SEL
ENTER
DISC
BASS/TREBLE
3
+ −
+
10
SUB TITLE
REMOTE
VOLUME
SETUP
1 Press RECEIVER.
2 Press the EFFECT/CH SEL button
repeatedly until you see EFFECT in the
receiver's display.
3 Use the +/– buttons to add or subtract
the amount of effect.
• The amount of effect can be adjusted ranging from 10
memo
to 90 (the default setting value is 50) by pressing +/–.
Adding/Adjusting the Effect in Dolby Pro
Logic II MUSIC Mode
The Dolby Pro Logic II MUSIC mode has three settings you can
choose from which adjust the spatial feeling of the surround sound.
These settings are best matched to each individual source instead
of one setting being left on for all sources. The three settings and
how to apply them are explained here. To start this setup select
Dolby Pro Logic ll (if necessary) with the MUSIC button.
1 Press RECEIVER.
2 Press the EFFECT/CH SEL button
repeatedly and select the setting you
want. They appear in the receiver's
display.
CENTER WIDTH : With Pro Logic decoding center channel
signals can come only from the center speaker. If no center
speaker is present this channel is split between the two front
speakers, creating a "phantom" channel. The CENTER WIDTH
feature lets you adjust the center channel so it can heard only
from the center speaker, only as a "phantom" channel or in
varying degrees of both.
DIMENSION: This allows you to adjust the soundfield
towards the front or towards the rear of your room.
PANORAMA: This gives the music a wraparound surround
feel.
3 Use the +/– buttons to add or subtract
the amount of effect or turn on/off.
CENTER WIDTH : Strengthen or weaken the effect between
0–7. The default is 3.
DIMENSION: Move soundfield backward or forward with -3
being the furthest back and +3 being the furthest forward.
The default is 0.
PANORAMA: Turn on or off. The default is off.