Channel Step Setting (Multi-Voltage Model Only); To Change Channel Steps (Multi-Voltage Model Only); Direct Access Tuning - Pioneer VSX-D2011-G Operating Instructions Manual

Using the Tuner

Channel Step Setting (multi-voltage model only)

The unit has been factory preset to the channel allocation value for the area in which it is to be sold. If this
value is set incorrectly, the tunes in frequency may be wrong, or sound may be distorted, resulting in an
inability to reproduce reception signals at their proper sound quality. For this reason, be sure to confirm
that the values are set correctly before first using the unit.
FM 50 kHz, AM 9 kHz:
Set to this position, for areas with an FM reception step of 50 kHz and AM 9 kHz.
FM 100 kHz, AM 10 kHz:
Set to this position for areas with an FM reception step of 100 kHz and AM 10 kHz.
memo When unsure about the channel allocation for your area, consult your dealer for correct
information.
To Change Channel Steps
1 Turn the power off (standby mode).
2 While holding down the TONE – button press the STANDBY/ON button.
3 When you see STEP 9K/50K or STEP 10K/100K appear in the display. To change channel steps again
repeat steps 1 and 2.

Direct Access Tuning

The following steps show you how to tune directly to a specific frequency using the remote control.
S0URCE
DVD/LD
VCR2
CD-R/
TAPE1
DIMMER
4
SIGNAL SEL
VIDEO SEL
SYSTEM SETUP
MENU
TUNER EDIT
AUDIO
TUNING
1
STATION
4
CHANNEL
TV VOL
58
En
SETUP
TV SYSTEM RECEIVER
OFF
VCR1/
TV/SAT TV CONT
DVR
MULTI CONTROL
MULTI
VIDEO CD
OPERATION
1
MD/
TUNER RECEIVER
TAPE2
LOUDNESS TONE EFFECT/CH SEL
1 2 3 4
+
DNR BASS/TREBLE
5 6 7 8
3
–
+
HI-BIT 10
DISC
9 0
ENTER
DIRECT ACCESS SEARCH MODE
GUIDE
TOP MENU
TRACK
ENTER
EXIT
RETURN
MPX
TEXT ON RF ATT DISP MODE
¶ 8
SUB TITLE
2
– +
BAND TUNING
3 ¡
– +
TEXT OFF CLASS STATION
7 ¢
– +
CHANNEL
TV INPUT INPUT
TV CONTROL
MIDNIGHT VOLUME
TV CH
MULTI CH
INPUT
1 Press the TUNER button.
This selects the tuner function on the receiver and sets
the remote to the tuner operation mode.
2 Press the BAND button to select the
band (FM or AM).
Each press switches the band : FM j AM
3 Press the DIRECT ACCESS button to
activate the direct access tuning mode.
The cursor blinks in the display on the front panel.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
DTS ES EX
RF
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C
R LFE
L S R
S S SP A B
4 Use the number buttons to enter the
frequency of the station you want.
Example:
To tune station 106.00 (FM), press: 1 = ` = 6 = ` =
`
To cancel before inputting the frequency
Press DIRECT ACCESS, and enter the frequency again.
TONE DNR ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM