Dynamic Range Control - Pioneer VSX-D1011-G Operating Instructions Manual

Fine Tuning Your System

DYNAMIC RANGE CONTROL

This feature makes it possible to enjoy full surround sound effects on Dolby Digital and DTS sources even at low
volumes. It does this by compressing the dynamic range. Dynamic range is the difference between the loudest
and the softest sounds in any given signal. Compressing the range plays sounds so the quieter ones are audible
and the louder ones don't get distorted or become overpowering. This feature only applies to Dolby Digital and
DTS sources but the MIDNIGHT mode (explained on page 48) accomplishes the same end for a variety of
sources. If continuing from BASS PEAK LEVEL, DYNAMIC RANGE CONTROL should be selected.
MENU
SYSTEM
SETUP
AUDIO
CHANNEL
1-6
STANDBY/ON
MOVIE MUSIC
MULTI JOG
Follow steps 1-5 on page 82, if necessary, to get
to the starting point mentioned here.
1 D-RANGE CTRL should be
selected, if it isn't use the 5∞
buttons to select and press
ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R SP A B
S S
2 Use the 5∞ buttons to choose
either OFF, MID or MAX. Press
ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS
AUTO DIGITAL
DTS ES EX
RF
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
Dynamic Range Control is set.
OFF: No Dynamic Range Control.
MID: A moderate amount of Dynamic Range
Control is applied.
MAX: The most Dynamic Range Control available
is applied.
90
En
MASTER
VOLUME
TUNER EDIT TEXT ON TOP MENU
TUNE
GUIDE
1-6
ST ST
ENTER
RETURN
TUNE
− +
TEXT OFF BAND CHANNEL
RF ATT D.ACCESS MPX CLASS
STANDBY
ENTER
STA
MULTI JOG CONTROL SIGNAL HI-BIT SB CH
SET UP RETURN SELECT HI-SAMPLING MODE BAND CLASS SELECT
TONE CONTROL
PHONES
SPEAKERS TONE BASS/TREBLE
MIDNIGHT TONE DNR ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
MIDNIGHT TONE DNR ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
3 EXIT should be selected (if it
isn't use the 5∞ buttons to
select it), ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
RF DTS ES EX
DIGITAL MPEG AAC
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R SP A B
S S
If you want to change a setting before
proceeding
Start over from step 1.
4 You are now finished with
EXPERT SETUP, EXIT should be
selected (if it isn't use the 5∞
buttons to select it), press
ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R SP A B
S S
5 EXIT should be selected (if it
isn't use the 5∞ buttons to
select it), press ENTER.
6 Use the 5∞ buttons to select
EXIT, press ENTER.
The receiver returns to normal operation.
memo
The default is OFF.
STEREO MONO
TONE DNR ATT dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
TONE DNR ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM