Table of Contents
Advertisement
Using SYSTEM OFF
Do the following to use the SYSTEM OFF function.
The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and/or turn off with
the remote control. Most PIONEER components will automatically turn off. The receiver itself will go off
automatically as well.
The following PIONEER components can be turned off using the SYSTEM OFF function:
DVD, DVD-Recorder, LD, CATV, CD, CD-R, MD, Satellite Tuner, Tape, Tuner, VCR, and TV.
RECEIVER
MULTI
SYSTEM
OPERATION
OFF
MULTI CONTROL
DVD/LD
VCR1/DVR
TV / SAT
VCR 2
C D
TUNER
ACOUSTIC
MOVIE
MUSIC
EQ
SURROUND
SB CH
MODE
MODE
STEREO/
ENTER
MIDNIGHT
DIRECT
The PIONEER SR System: Operating other PIONEER
components
Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the
receiver's remote control at the remote sensor on the front panel of the receiver. The receiver then sends the
remote control signals to the other devices via the CONTROL OUT terminal.
Receiver
Remote Control
• You can also control PIONEER components (and those made by other manufacturers) by pointing the
memo
receiver's remote control directly at the respective component. This type of operation does not re-
quire control cords. All you have to do is recall the appropriate stored settings (see page 63).
• If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able
to use this unit's remote control.
• If you use this feature make sure an analog (audio and/or video) connection has been made between
the units.
1 Press the MULTI OPERATION button
1
SOURCE
TV CONT
1
RECEIVER
INPUT
MULTI CH
INPUT
MUTE
PIONEER component
with an CONTROL
terminals.
Using Other Functions
and within 5 seconds press the
RECEIVER button.
All the PIONEER components connected to the
receiver and the receiver will stop and/or go off.
To CONTROL IN
terminal of another
PIONEER component
with an CONTROL
terminals.
75
En
Hide quick links:
Advertisement
Table of Contents
