Acoustic Cal Eq - Pioneer VSX-D1011-G Operating Instructions Manual

ACOUSTIC CAL EQ

This setting is a kind of room equalizer for your speakers. This receiver let's you equalize the speakers in
accordance with the front speakers.
The front left speaker will serve as the reference tone. The front left tone and the target speaker (the one you
are trying to adjust) will sound in turns, so you can judge which needs to be louder.
MASTER
VOLUME
MENU TUNER EDIT
TUNE
SYSTEM
SETUP
ST
ENTER
AUDIO
TUNE
−
CHANNEL TEXT OFF
RF ATT D.ACCESS
1-10
STANDBY/ON
STANDBY
MOVIE MUSIC ENTER
MULTI JOG
MULTI JOG CONTROL
SET UP
PHONES
Follow steps 1-5 on page 82, if necessary, to get
to the starting point mentioned here.
1 ACOUSTIC CAL. should be
selected, if it isn't use the 5∞
buttons to select and press
ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT TONE DNR
DIGITAL
AUTO
RF DTS ES EX
DIGITAL MPEG AAC
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R SP A B
S S
Test tones will be output.
WARNING: the test tones are very loud!!
Make sure there are no infants or small children
in the room and that no one who will be scared,
upset or damaged by loud noise is present. You
yourself may want to wear earplugs.
ACOUSTIC CAL EQ: All speakers (except for
the subwoofer) are set in accordance with the
settings of the FRONT speakers. You can adjust
each speaker individually to suit your taste. This
setting allows the listener to enjoy a sound
balance defined by the front speakers (the main
speakers for home theater). The front left
speaker will serve as the reference tone. The
front left tone and the target speaker (the one
you are trying to adjust) will sound in turns, so
you can judge which needs to be louder.
TEXT ON TOP MENU
GUIDE
1-10
ST
RETURN
+
BAND CHANNEL
MPX CLASS
SIGNAL HI-BIT SB CH STA
RETURN SELECT HI-SAMPLING MODE BAND CLASS SELECT
TONE CONTROL
SPEAKERS TONE BASS/TREBLE
ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
Fine Tuning Your System
2 Use the 5∞ buttons to select the
channel that you want to adjust.
Press ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT TONE DNR
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
MUSIC
OFF
L C R LFE
L S S R S SP A B
The adjustable channels are:
Center, Surround L, Surround R, Surr Back
(surround back) L, Surr Back (surround back) R.
3 Use the 5∞ buttons to select the
frequency you want to adjust.
Press ENTER.
PRO LOGIC LOUDNESS MIDNIGHT TONE DNR
SIGNAL Neo :6
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S S R S SP A B
The adjustable frequencys are:
63Hz, 125Hz, 250Hz, 4kHz, 11.3kHz.
For the speakers you set to SMALL (see pages
37–38) you won't be able to adjust the 63 Hz
setting.
4 Use the 5∞ buttons to adjust
the frequency. When you have it
at the level you want press
ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT TONE DNR
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S S R S SP A B
Set the frequencies within the –6 dB to +6 dB
range in steps of 0.5 dB. If OVER appears in the
display you have set the levels too high. Reduce
them until OVER disappears.
5 The cursor automatically goes to
the next frequency. Press ENTER
and repeat steps 3 & 4 to adjust
all the frequencies.
PRO LOGIC LOUDNESS MIDNIGHT TONE DNR
SIGNAL Neo :6
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
MUSIC
OFF
L C R LFE
L S S R S SP A B
ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
STEREO MONO
ATT dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
87
En