Setting Up The Direct Function - Pioneer VSX-D1011-G Operating Instructions Manual

Setting up the DIRECT FUNCTION

The direct function will not be necessary for most users. It is designed in case you have an external video
source connected to your TV (a video source that is not going through the VSX-D1011). For this explanation we'll
call this the external video deck. You'd like to control external video deck with this unit's remote control so
you've assigned it a function button (for example purposes, the VCR 2 button). Yet, if you put the receiver in
VCR 2 mode you'll get no picture on your TV because the external video deck signal is not going through the
VSX-D1011. To get around this problem you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press
VCR 2 function button you can control the external video deck with the remote but the receiver does not go into
VCR 2 mode.
• To exit from the remote control setup mode at any time, press REMOTE SETUP.
memo
• The default setting for all DIRECT FUNCTIONs is ON.
RECEIVER
MULTI SYSTEM
OPERATION OFF
MULTI CONTROL
2
DVD/LD TV / SAT VCR1/DVR
VCR 2 C D TUNER
ACOUSTIC
MOVIE MUSIC
EQ
SURROUND SB CH
MODE
MODE
STEREO/
DIRECT ENTER MIDNIGHT
MASTER
VOLUME
MENU TUNER EDIT TEXT ON
TUNE
SYSTEM
SETUP
ST
ENTER
AUDIO
TUNE
−
CHANNEL TEXT OFF BAND
3
RF ATT D.ACCESS MPX
3
DIMMER LOUDNESS TONE
SIGNAL SEL DNR BASS/TREBLE
1
VIDEO SEL HI-BIT
TV CONTROL
CHANNEL VOLUME
RECEIVER
1 While holding down the REMOTE
LED
SOURCE
TV CONT
RECEIVER
INPUT
MULTI CH
INPUT
2 Press the MULTI CONTROL button of
MUTE
TOP MENU
GUIDE
ST
RETURN
+
CHANNEL
3 Set the DIRECT FUNCTION of each
CLASS
EFFECT/CH SEL
ENTER
DISC
+ −
+
10
SUB TITLE
1
REMOTE
SETUP
4 Repeat steps 2–3 to set the direct
5 Press the REMOTE SETUP button to
Remote Control of Other Components
SETUP button press
direct function setup mode.
The LED begins to blink.
To cancel the direct function setup mode press
REMOTE SETUP.
the component whose direct
function you want to turn on or off.
The LED lights and remains lit.
For example, if you want to turn off direct function for
VCR 2, you would press VCR 2.
external source to OFF by pressing
, ON by pressing
The LED blinks.
ON: The direct function is on.
OFF: The direct function is off.
For example, if you want to turn off direct function for
VCR 2, you would press
function for as many components as
you want.
exit the direct function setup mode.
to select the
.
.
67
En