Assigning The Digital Inputs - Pioneer VSX-D1011-G Operating Instructions Manual

Fine Tuning Your System

Assigning the Digital Inputs

If you did not hook up your digital equipment in accordance with the default settings for the digital inputs
(see page 16, 18 & 21) you need to complete the procedure below. You have to do this in order to tell the
receiver what digital equipment is hooked up to which terminal so the buttons on the remote correspond
to what you have hooked up.
DVD/LD
VCR 2
MOVIE
STEREO/
DIRECT
MENU
2
SYSTEM
SETUP
AUDIO
3-8 2
STANDBY/ON
MOVIE MUSIC ENTER
MULTI JOG
(If you are continuing from page 78 you can skip
the first two steps.)
1 Turn on the receiver, press the
RECEIVER button on the remote
control.
2 Press the SYSTEM SETUP
button.
3 Looking at the display on your
receiver, use the 5∞ buttons to
select INPUT ASSIGN. Press the
ENTER button.
SIGNAL PRO LOGIC Neo :6 LOUDNESS
AUTO DIGITAL
DTS ES EX
RF
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S S R S SP A B
4 DIGITAL-IN should be selected, if
not use the 5∞ buttons to select
it. Press the ENTER button.
SIGNAL PRO LOGIC Neo :6 LOUDNESS
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
80
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
En
TV / SAT VCR1/DVR TV CONT
1
C D
TUNER RECEIVER
ACOUSTIC
MUSIC
EQ INPUT
SURROUND MULTI CH
SB CH
MODE INPUT
MODE
ENTER MIDNIGHT
MUTE
MASTER
VOLUME
TUNER EDIT TEXT ON TOP MENU
TUNE
GUIDE
3-8
ST ST
ENTER
RETURN
TUNE
RETURN button
STANDBY
MULTI JOG CONTROL
SIGNAL HI-BIT SB CH
SET UP RETURN SELECT HI-SAMPLING MODE BAND CLASS
SELECT
PHONES TONE CONTROL
SPEAKERS TONE BASS/TREBLE
MIDNIGHT TONE DNR ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
MIDNIGHT TONE DNR ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
5 Use the 5∞ buttons to move
through the different digital input
settings and press the ENTER
button.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
The available digital input settings are:
DIGI-1: TV/SAT, DIGI-2: CD-R,
DIGI-3: DVD/LD, DIGI-4: CD
The selected setting will blink.
6 Use the 5∞ buttons select the
component that you hooked up
to that digital in. Press the
ENTER button.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
If you're not sure which component is connected
to which digital in, look on the back of the
receiver and check the cables you connected.
7 When you're finished use the 5∞
buttons to select EXIT and press
ENTER.
This exits the DIGITAL-IN SELECT mode.
8 Use the 5∞ buttons to select
EXIT and press ENTER. Then, use
the 5∞ buttons to select EXIT
and press ENTER.
This exits the SYSTEM SETUP mode and returns
to normal operation.
memo
• The possible digital inputs that can be assigned are:
DVD/LD, TV/SAT, VCR1, VCR2, CD, CD-R, MD.
• If you assign a digital input to a certain function (for
example DVD/LD) then any digital inputs previously
assigned to that function will automatically be set to
OFF. This is because one function cannot be assigned
to two different places.
TONE DNR ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
TONE DNR ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM