Surround Back Channel Input Setting (Vsx-D812/D912 Only); Digital Input Settings - Pioneer VSX-D712-S Operating Instructions Manual

Setting up
Surround back channel input
setting
(VSX-D812/D912 only)
• Default setting: SB 2ch IN
You only have to make this setting if you are
using a seperate component for decoding
DVDs, and the component has only one
surround back channel output. If this is the
case, select SB 1ch IN, otherwise leave it set
to SB 2ch IN.
• Use or to select SB 2ch IN or SB
1ch IN.

Digital input settings

Here you tell the receiver what components
you have hooked up to the coaxial and optical
DIGITAL IN jacks on the back of the receiver.
After you assign a component to a digital jack,
whenever you select that component, (for
example, a DVD player) the receiver
automatically changes to the digital input
setting and DIGITAL shows in the display.
Coaxial digital 1:
• Default settings: DVD
• Use or to assign the coaxial
digital 1 input (DVD, TV, CD, CDR, VCR or
OFF).
Coaxial digital 2:
• Default setting: CD
• Use or to assign the coaxial
digital 2 input (DVD, TV, CD, CDR, VCR or
OFF).
Optical digital 1:
• Default settings: TV
• Use or to assign the optical digital
1 input (DVD, TV, CD, CDR, VCR or OFF).
Optical digital 2
(VSX-D812/D912 only)
• Default setting: CDR
• Use or to assign the optical digital
2 input (DVD, TV, CD, CDR, VCR or OFF).
• You can't assign two inputs to the same
function. For example, assigning input 1
to the default setting of input 2
automatically switches input 2 to OFF.
07
49
En