Searching For Rds Programs; (European Model Only) - Pioneer VSX-D1011-G Operating Instructions Manual

Using the Tuner
Searching for RDS programs (European model only)
One of the most useful features of RDS is the ability to search for a particular kind of radio program. You can
search for any of the program types (listed on page 59).
STANDBY/ON
STANDBY
MOVIE MUSIC ENTER
MULTI JOG
MULTI JOG CONTROL
SET UP
PHONES
1,4 5-6
60
En
SIGNAL HI-BIT SB CH STATION TUNING TUNER CHARACTER/ EON
RETURN SELECT HI-SAMPLING MODE BAND CLASS SELECT EDIT SEARCH MODE
MULTI JOG/ENTER
TONE CONTROL
SPEAKERS TONE BASS/TREBLE
S-VIDEO VIDEO L AUDIO R
VIDEO INPUT
2 4 3
1 Tune into an FM station.
AUDIO/V
Refer to "Automatic and Manual Tuning" or "Direct
Access Tuning" on p. 54 and 55.
2 Use the BAND button to select the
FM band.
RDS is only broadcast on FM.
3 Press the SEARCH MODE button.
SEARCH shows in the display.
4 Press the +/– buttons or use the
MULTI JOG dial to select the
program type you want to hear.
5 Press ENTER to search for the
program type.
The system starts searching through the station
presets for a match. When it finds one, the search
stops and the station plays for five seconds.
6 If you want to keep listening to the
station, press ENTER within the 5
seconds.
If you don't press ENTER, searching resumes.
If NO PTY is displayed it means the tuner couldn't find
that program type at the time of the search.
memo
• RDS searches memorized stations only. If no
stations have been (see page 59 to do this), NO
PTY is displayed.
• FINISH means the search is complete.