Pioneer VSX-D1011-G Operating Instructions Manual page 29

4 ENTER button
Use this button to enter information concerning
the SYSTEM SETUP, listening mode or the tuner.
5 STANDBY indicator
Lights when the receiver is in STANDBY mode.
(Please note that this receiver consumes a
small amount of power [0.7 W for the European
model and 0.9 W for the multi-voltage model] in
the standby mode.)
6 Remote sensor
Receives the signals from the remote control.
7 Display (See page 27)
8 MCACC indicator (see page 47)
Lights when the ACOUSTIC CAL EQ is on.
9 MULTI CH IN button
Use this button to select the component you
have hooked up to the MULTI CH IN terminals
(for example, a DVD-Audio player).
10 ACOUSTIC EQ button (see page 47)
Use to switch on and off the Acoustic Calibra-
tion EQ.
11 MASTER VOLUME dial
Use to raise or lower the volume of the receiver.
12 MULTI JOG CONTROL buttons
SET UP
Press to switch the SYSTEM SETUP mode.
RETURN
Press to move back one step in the SYSTEM
SETUP process.
13 SIGNAL SELECT button (see page 42)
Press SIGNAL SELECT repeatedly to select one
of the following:
AUTO – If there are analog and digital signals
input, the receiver automatically selects the
digital signal.
DIGITAL – To select an optical or coaxial
digital signal.
ANALOG – To select an analog signal.
14 HI-BIT HI-SAMPLING button (see page
50)
Use this button to switch the HI-BIT
HI-SAMPLING on or off. Use to hear CD and
DVD, as well as other digital soundtracks at a
wider dynamic range, allowing for finer audio
reproduction.
15 SB CH MODE button (see page 51)
Use this button to turn the surround back
channels ON/OFF/AUTO or switch the VIRTU-
AL SURROUND BACK mode between ON/
OFF/AUTO.
16 TUNER CONTROL buttons (See page
54-62)
BAND
Press to select the AM or FM band.
Displays & Controls
CLASS
Press repeatedly to switch the preset station
classes.
SELECT
Switches the –/+ buttons between station
memory and frequency select modes.
–/+
Selects station memories or frequencies when
using the tuner.
TUNER EDIT
Press to memorize and name a station for recall
using the MULTI JOG and ENTER buttons.
17 CHARACTER/SEARCH button (See page
60)
Use to search for different program types in
RDS mode.
18 EON MODE button (see pages 61-62)
Use to search for different programs that are
transmitting traffic or news information (this
search method is called EON).
19 PHONES jack
Connect headphones for private listening (no
sound will be heard through the speakers).
20 SPEAKERS (A/B) button
The use of this button depends on how the
SURRBACK SYSTEM (see page 35) are set. If
NORMAL SYSTEM is chosen this button
toggles between A and OFF. If SECOND ZONE
is chosen this button toggles between A, B,
A+B and OFF (see page 70). If FRONT BI-AMP
is chosen this button toggles between A+B and
OFF (see page 70).
21 TONE CONTROL buttons (see page 49)
TONE button
This button switches between TONE ON and
TONE BYPASS, which bypasses the tone circuitry.
BASS/TREBLE button
Use to select whether the bass or treble will be
adjusted.
–/+ buttons
Use to adjust the frequency levels.
22 VIDEO INPUT jacks (see page 17)
S-VIDEO
Video input for connecting a portable DVD player,
video camera (etc.), that has an S video out.
RCA VIDEO / AUDIO (L/R)
Video input for connecting a portable DVD
player, video camera, etc., that has standard
RCA video/audio outputs.
23 MIDNIGHT button (see page 48)
Switches the MIDNIGHT listening mode on or
off (for all modes except THX CINEMA and
MULTI CH IN).
24 LOUDNESS button (see page 48)
Switches the LOUDNESS mode on or off (for all
modes except THX CINEMA and MULTI CH IN).
29
En