Crw2200E Setup Flowchart - Yamaha CRW2200S Series Owner's Manual

CRW2200E Setup Flowchart

For easy cross-referencing, the relevant pages in this manual are given.
STEP
Does your computer have a SCSI
1
connection with the drive?
Connecting the CRW2200E
STEP
2
( P. 37 – 46)
1. Opening the Computer ( P. 37)
2. Choosing the Connecting Method ( P. 38)
3. Setting the Jumper Switches ( P. 42)
4. Installing the CRW2200E ( P. 43)
Configuring for the Operating
STEP
3
System ( P. 47, 48)
1. Check that the CRW2200E is recognized
correctly. ( P. 47)
2. DMA Settings ( P. 48)
Installing the CD Writing
STEP
4
Software
For details about how to install the software,
refer to the documentation that came with it.
Start Using the CRW2200E!
STEP
5
Use the drive to create audio CDs, to back up
data on your hard disk, or for whatever
purpose suits your needs.
No
E-IDE (ATAPI) Connection Set Up
Remove the SCSI
convertor. ( P. 32 – 34)
YES
36