Operation; Loading A Disc; Ejecting A Disc - Yamaha CRW2200S Series Owner's Manual

Operation

You can load and eject a disc (as described below) only when the computer is turned
on.

Loading a Disc

1 1 1 1 Open the tray by pressing the Eject button on the CRW2200 drive's front
panel.
2 2 2 2 Place the disc onto the tray with its label or printing facing upward.
3 3 3 3 Close the disc tray by pressing the Eject button again. You can also
gently push it closed.
Load or unload the disc after the tray has fully opened. Do not push or pull
the tray using excessive force. Doing so can damage the drive or the disc.

Ejecting a Disc

1 1 1 1 Open the tray by pressing the Eject button on the CRW2200 drive's front
panel.
2 2 2 2 Remove the disc from the tray.
3 3 3 3 Close the disc tray by pressing the Eject button again. You can also
gently push it closed.
1
1
2
2
50