Connecting The Crw2200S - Yamaha CRW2200S Series Owner's Manual

Connecting the CRW2200S

This section explains how to connect the CRW2200S by SCSI to a tower-type
computer.
Note
The way of removing the casing or panel, or installing built-in devices may differ from your
computer. Be sure to follow the procedures in the documentation that came with your computer.
Opening the Computer
1 1 1 1 Shut down your computer and unplug it from the AC outlet.
If you proceed without doing this, you run
the risk of receiving an electric shock and/or
short-circuiting and damaging components,
including the CRW2200S.
2 2 2 2 Remove all attached cables and peripheral devices and the outer casing
of the computer. If you need to remove screws in the process, make sure
you don't lose them. Remove the cover and front panel of the computer.
Cover
SCSI Connection Set Up
Front panel
14