Yamaha CRW2200S Series Owner's Manual page 22

Cd-r/rw drive

Hide thumbs Also See for CRW2200S Series:

Table of Contents

SCSI Connection Set Up

Connecting the digital audio cable

The digital connection for the CRW2200S is ideal for pure quality audio playback,

outputting digital signals recorded on CDs to the sound card without any distortion.

Examples of the digital connection

To output digital audio signals to external devices, you must use the digital connection to

connect the unit and the sound card. With this connection you can:

• Enjoy music using a digital audio amplifier.

• Record music digitally with an MD player.

Connect the digital audio cable to the DIGITAL AUDIO OUT connector on the

rear panel of the CRW2200 drive, making sure of the connector's direction.

DIGITAL AUDIO

OUT

Ground (G)

Signal (D)

Note

For the digital connection, you need a digital audio cable with appropriate connectors, and a

sound card with SPDIF (digital audio) input connectors.

Digital audio cable

(to Sound card)

Table of Contents