Yamaha CRW2200S Series Owner's Manual page 45

Connecting examples
Yamaha recommends one of the following connections.
Example-1: As secondary slave (For supplemental drive)
Hard disk
(master)
Hard disk
(slave)
Example-2: As secondary master
(For replacing your existing drive with the unit)
Hard disk
(master)
To make the best use of the performance of the CRW2200E, Yamaha
recommends you connect it as a sole secondary master.
Note
The CRW2200E is shipped with the SLAVE setting. Reset to MASTER if you
connect the drive solely to the secondary IDE cable.
IDE cable IDE cable
(primary) (secondary)
IDE cable
(primary)
E-IDE (ATAPI) Connection Set Up
CD-ROM drive
etc. (master)
CRW2200E
(slave)
CRW2200E
(master)
IDE cable
(secondary)
40