Table of Contents
Advertisement
SCSI Connection Set Up
Termination ON (Default)
1
2
4
Set to "ON" if CRW2200S is
last device on SCSI chain
Note
The default setting of the Terminator switch is ON.
Block Size
The data block size of the CRW2200S can be set to 512 bytes per sector by
setting the Block Size jumper switch to "ON." This is necessary when installing
the CRW2200S on a UNIX-based workstation. It is not necessary for Windows
95/98/98 Second Edition/Me/NT4.0/2000 Professional computers.
About the Block Size
Block Size shows the capacity of a sector that is the unit of data management of OS.
Block size OFF (Default)
1
2
4
Note
By factory default, the Block Size jumper switch is set to "OFF" and should normally be left
in this state.
23
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
Set to "OFF" if the CRW2200S
is not the last device on the
SCSI chain
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
Termination OFF
ID SELECT
TERMINATOR
BLOCK SIZE
1
2
4
Block size ON
ID SELECT
TERMINATOR
BLOCK SIZE
1
2
4
Set to "ON" when installing
CRW2200S on UNIX
workstation
PARITY
PARITY
Advertisement
Table of Contents
