Table of Contents
Advertisement
SCSI Connection Set Up
7 7 7 7 Connect the forked end of the power cable (included) to the drive's and
the SCSI convertor's DC INPUT connectors.
Connect the smaller connector to the SCSI convertor with the yellow wire to the
left. (See the figure below.)
Yellow wire
Top
Bottom
Smaller
connector
Power cable
Note
These connectors are D-shaped, so you can only connect the power cables in the correct
orientation. Do not apply excessive force when making this connection. You risk damaging
the convertor if you make these connections upside down.
19
Bigger
connector
Top
Bottom
DC INPUT
connector
Advertisement
Table of Contents
