Yamaha CRW2200S Series Owner's Manual page 43

Cd-r/rw drive

Hide thumbs Also See for CRW2200S Series:

Table of Contents

Choosing the Connection Method

4 4 4 4 First, check how existing IDE devices are connected to your computer,

and then determine how to connect the CRW2200E in conjunction with

those devices.

As a supplemental drive

If the casing of your computer has a spare 5.25-inch drive bay available, such as

with many tower-type designs, you can install the

the computer's existing CD-ROM drive.

As a replacement drive

If the casing of your computer does not have a spare 5.25-inch drive bay

available, such as with many desktop-type designs, you can replace the

computer's existing CD-ROM drive with the CRW2200E.

Note

You cannot replace the computer's existing CD-ROM drive with the CRW2200E using the

existing cable if the drive is a SCSI type. In this case, use an IDE cable to connect the

CRW2200E.

E-IDE (ATAPI) Connection Set Up

CRW2200E supplemental to

CRW2200E

CD-ROM drive

CRW2200E

Table of Contents