Table of Contents
Advertisement
SCSI Connection Set Up
13 13 13 13 Connect the audio cable to the sound card.
Connecting the analog audio
cable
There are two connectors at the
sound card side of the cable: a
vertically-mounted type (PH) and a
horizontally-mounted type (MPC).
Choose the one that matches your
sound card's connector and leave the
other free.
Note
Some sound cards may have one or more
audio input connectors. However,
depending on your connectors, the
specifications may differ from the
CRW2200 drive. If no sound is audible
from the speaker even though the audio
cable is connected, refer to the
documentation that came with your sound
card for more details, and make sure that
your audio cable is connected correctly.
Connecting the digital audio
cable
Connect the digital audio cable to the
SPDIF input connector (digital
audio) of the sound card, making
sure of check of the connector's
direction.
Note
For the digital connection, you need a
digital audio cable with appropriate
connectors, and a sound card with SPDIF
(digital audio) input connectors.
Note
When removing the drive from the PC, disconnect the sound card's side of the cable first.
After removing the SCSI convertor, disconnect the drive's side of the cable.
27
Audio cable
Vertically-
mounted
type (PH)
Sound card
Audio input
connector
Digital audio cable
Sound card
Horizontally-
mounted
type (MPC)
SPDIF
Advertisement
Table of Contents
