Table of Contents
Advertisement
E-IDE (ATAPI) Connection Set Up
Configuring for the Operating System
14 14 14 14 When using Windows 95/98/98 Second Edition/Me, after the computer's
operating system has loaded, open "Control Panel" and double-click on
the "System" icon. Select the "Device Manager" tab and double-click on
"CDROM." If the drive has been correctly installed, it should be listed
as shown in the figure below.
For Windows NT
You can verify by opening "Control Panel," double-clicking on "SCSI Adapter" and clicking
on the "Devices" tab.
For Windows 2000 Professional
You can verify by opening "Control Panel," double-clicking on "System," selecting the
"Hardware" tab, and clicking on the "Device Manager" button in "System Properties."
Notes
• For details about how to use the operating system, refer to the documentation that came
with it.
• If there is an
has not been installed correctly.
47
* This is a screen shown in the Windows Me environment.
or
mark, etc., next to the icon for the CRW2200E, this means that it
Advertisement
Table of Contents
