Installing Wheel Lock Shoe Extensions - Invacare Tracer IV Heavy Duty User Manual

Anti-tippers/Wheel Locks
Bolt and Locknut
Mounting Positions
Wheel Lock

10.3 Installing Wheel Lock Shoe Extensions


For this procedure, refer to FIGURE 5.
1. Loosen the two set screws on the wheel lock shoe extension until the set screws DO NOT protrude into the slot.
2. Insert the wheel lock shoe into the slot in the shoe extension.
 Ensure the pointed end of the wheel lock shoe
extension is facing toward the rear wheel.
3. Position the wheel lock shoe extension so the outside edge is flush
with the end of the wheel lock shoe.
4. Securely tighten the two set screws to secure the wheel lock shoe
extension to the wheel lock shoes.
Invacare® Tracer IV®Heavy Duty/Extra Wide Wheelchair
Wheel Lock
Handle
Wheel Lock Shoe
Rear Wheel
FIGURE 4 Adjusting Patient Operated Wheel Locks
56
DETAIL "A"
Wheel Lock Shoe
Extension
Pointed End of Wheel
Lock Shoe Extension
FIGURE 5 Installing Wheel Lock Shoe Extensions
1 3
/ inch ( / inch
8 16
pneumatic tires)
Wheel Lock
Shoe
Tire
Set Screws
Slot
Part No. 1110558