5. Adjust!the!footplate!assembly!height!by!aligning!the!desired!adjustment!holes!in!the!
upper!front!rigging!support!and!lower!footplate!assembly.
6. From!the!outside!of!the!swingaway!front!rigging,!insert!the!threaded!rivet!through!
both!the!front!rigging!support!and!the!footplate!assembly.
7. From!the!inside!of!the!swingaway!front!rigging,!insert!the!button!head!screw!through!
the!appropriate!adjustment!hole!and!thread!into!the!threaded!rivet.
8. Using!a!screwdriver!to!hold!the!threaded!rivet!in!position,!securely!tighten!the!button!
head!screw.!Torque!to!32!in#lbs.
9. Rotate!cam!lock!lever!down!to!locked!position.
10. Repeat!STEPS!1#9!to!adjust!the!remaining!footrest.
Button Head
Screw
Adjustment
Hole
Cam Lock
Lever
Inside of
Swingaway
Front Rigging
Raising/Lowering Elevating Legrest Assembly
Ensure hands and fingers are clear of elevating legrest mechanism before pushing
release lever to lower the elevating legrest. Otherwise injury may occur due to
pinch points.
The wheelchair user's leg MUST be supported by an assistant before attempting to
lower legrest.
NOTE:!For!this!procedure,!refer!to!FIGURE 4.4!on!page!34.
Part No. 1056953
Front Rigging
Support
Button Head
Screw
Threaded Rivet
Footplate
Assembly
Front Rigging
NOTE:!Swingaway!footrest!shown.
FIGURE 4.3 Bolt-In-Place Height
WARNING
SECTION 4—FRONT RIGGINGS
Front Rigging
Support
Adjustment
Hole
Outside of
Swingaway
33
Threaded
Rivet
Footplate
Assembly
9000 Series