Adjusting Footrest Height; Raising/Lowering Elevating Legrest Assembly - Invacare Veranda User Manual

6 FRONT RIGGING

6.2 Adjusting Footrest Height

1. Loosen, but DO NOT remove, the screw and locknut that secures the
lower footrest assembly to the upper footrest support.
2. Reposition the lower footrest assembly to the desired height.
3. Securely tighten the screw and locknut that secures the lower
footrest assembly to the upper footrest support.
4. If necessary, repeat STEP 1-3 for the opposite side of the
wheelchair.

6.3 Raising/Lowering Elevating Legrest Assembly

1. To raise the elevating legrest, the assistant or user should hold the
support tube and raise the elevating legrests until the desired height is
obtained.
2. To lower the elevating legrest, perform the following:
A. Support the user leg with one hand.
B. Push legrest release lever down with other hand.
C. Gently lower user leg down and rest it against the legrest.
Invacare® Veranda™Wheelchair
Locknut
FIGURE 2 Adjusting Footrest Height
FIGURE 3 Raising/Lowering Elevating Legrest Assembly
30
Upper Footrest
Support
Screw
Lower Footrest
Assembly
Legrest Release Lever
Support Tube
Part No. 1148116