Interpreting Status Leds For The Secure Port Module - Juniper NetScreen-5000 Series Installation And Configuration Manual

Table 17: Management Module Status LEDs (Page 2 of 2)
LED Color
POWER Green
Off
Red
STATUS Blinking green
Blinking amber
Off
HA Green
Red
Amber
Off
ALARM Red
Blinking red
Off
FLASH Green
Blinking green
Off

Interpreting Status LEDs for the Secure Port Module

The Status LEDs indicate whether the Secure Port Module is operating properly.
Table 18 describes the status possibilities for each.
Table 18: Secure Port Module Status LEDs
LED
POWER
STATUS
Meaning
The system is receiving power.
The system is not receiving power.
The power has a problem.
The system is operational.
The system is booting up.
The module is not operational.
The module is a master in a redundancy cluster.
The module is ineligible to be a backup.
The module is a backup in a redundancy cluster.
No HA activity has been defined.
An alarm that could mean a system failure.
A self-test failure occurred during startup.
The system has not detected an event or error at the current time.
The flash card is installed.
Flash card activity.
No flash card is loaded in the flash card slot.
Color Meaning
Green The system is receiving power.
Off The system is not receiving power.
Amber The system has initially received power.
Blinking green The system is up and operational and that the power source is
working properly.
Green The system has a problem.
Off The Secure Port Module is not operational.
Port Descriptions and LED Status
Status LED States
63