Mounting The Netscreen-5000 Series; Netscreen-5200 Front-And-Rear Mount - Juniper NetScreen-5000 Series Installation And Configuration Manual

Hide thumbs Also See for NetScreen-5000 Series:

Table of Contents

Mounting the NetScreen-5000 Series

The following sections describe how to rack-mount the NetScreen-5000 Series:

To mount the NetScreen-5200 with support from the front and rear, you need four

fitted screws, a phillips screwdriver, the rear slide kit, and brackets.

To front-and-rear mount the device:

1. Use the screws provided to install the slides and rack mount brackets to the

Figure 9: Installing the NetScreen-5200 Slides and Rack Mount Brackets

"NetScreen-5200 Front-and-Rear Mount" on page 21

"NetScreen-5200 Center-Mount" on page 23

"NetScreen-5400 Front-Mount" on page 24

sides of the chassis as shown in Figure 9.

Installing the Device

Table of Contents