Table of Contents
Advertisement
NetScreen-5000 Series Hardware Installation and Configuration Guide
NetScreen-5400 Fan Module
Figure 24: NetScreen-5400 Fan Module
Front View
Side View
To replace the fan module on a NetScreen-5400:
1. Loosen the top and bottom thumbscrews with a phillips screwdriver, turning
them counterclockwise.
2. Grip the screws, and then gently slide the fan module out.
Do not remove the fan module while the fans are still spinning.
WARNING:
Figure 25: Removing a NetScreen-5400 Fan Module
3. Align the new fan module in the fan bay, and then push it straight in.
52
Replacing the Fan Module
Advertisement
Table of Contents
