Installing The Device; General Installation Guidelines - Juniper NetScreen-5000 Series Installation And Configuration Manual

Hide thumbs Also See for NetScreen-5000 Series:

Table of Contents

Chapter 2

Installing the Device

This chapter describes how to install a NetScreen-5000 Series in an equipment rack

or on a desktop and how to configure the device on a network. This chapter

includes the following sections:

Observing the following precautions can prevent injuries, equipment failures, and

shutdowns:

Never assume that the power supply is disconnected from a power source.

Always check first.

Room temperature might not be sufficient to keep equipment at acceptable

temperatures without an additional circulation system. Ensure that the room in

which you operate the NetScreen-5000 Series has adequate air circulation.

Do not work alone if potentially hazardous conditions exist.

Look carefully for possible hazards in your work area, such as moist floors,

ungrounded power extension cables, frayed power cords, and missing safety

grounds.

Table of Contents